-
Hey,
Curf.py: in set_can both self.bus and self.logbus are trying to initialize to same device. This is not possible, and will result as an error when trying to connect logbus.
I removed all the…
-
Hello,
I'm very interested on this project. May you share the SOREL CAN BUS Interface (SCBI) ? Without it, it is very difficult to add functions / develop the interface !
Thanks
-
What is the preferred way to wire the CAN bus when you have multiple devices? In my example I have the SB2209 tool head board connected to my pi via a U2C adapter. What order should the three devices …
-
We have a Hitachi H-link2 system installed at our office. There is a P1P2MQTT bridge made by Arnold that we installed and we can see the raw packets going back and forth. But we are unable to control …
-
DS3231 in the following repository is using a different strategy to initialize i2c bus.
https://github.com/nopnop2002/esp-idf-ds3231
We can't initialize i2c bus twice, am I right?
Do we need to c…
-
Hello Massimo Saccani,
**Describe the bug**
I am experiencing an issue with the node-red-contrib-knx-ultimate node when trying to send a temperature value of 0.29°C to the KNX bus. The value is au…
-
### Checklist
- [X] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the results …
musdx updated
1 month ago
-
Hardware support for NMEA2K using a cheap ~~SN65HVD230~~ TJA1050 Chinese board.
NMEA2K cable can provide 12v to the m5stack and the ~~SN65HVD230~~ TJA1050 can translate the CAN messages to be readab…
-
Incredible tool that Relatify is, a life saver to fix and update routes! Thank you!
But I've found myself updating my first route only to find that the tool does not recognize the tag `busway=oppos…
-
scim本身是基于socket实现的事件循环,我想要在scim的输入法引擎插件中实现一套libdbus的api用来监听信号
` std::thread t([this]()
{
while (1)
{
dbus_connection_read_write_dispatch(d…