-
Following some testing with KK and IPTA people, we were trying to isolate a simple test for DMX fitting. We found that the results differed slightly between his machine and mine. I have since run it…
-
Using your example1.php and replacing with...
['length' => 1, 'width' => 1, 'height' => 100] results in "Container 100x1x100(cm) 10000(cm3)"
Whereas
['length' => 100, 'width' => 1, 'height' …
-
Hello again,
I hope you may assist with compiling. It's ok if you don't want to, please just close the issue if you have no time.
I have this [old zip file project open](https://github.com/Moebi…
-
hey there
i'm using rpi computer module
does any one test this library with rpi cm3
or it will work ?
-
It's detecting RPI CM3+ as '/dev/i2c-0'
...
Instead of '/dev/i2c-1'
...
-
The recording contains noise + cracks. cmd used:
```
arecord -D plughw:CARD=rockchiprk817,DEV=0 -V mono 1.wav
```
Sfinx updated
6 months ago
-
./bsp --dirty linux rk356x radxa-cm3-io
```
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
MODI…
Sfinx updated
6 months ago
-
Hello @milas
Could you please describe how we create the bootable image (.raw) ?
I tried by running the following :
make target-talos-sbc-rk3588 PLATFORM=linux/arm64 USERNAME=christos822 PUSH=t…
-
A Global High-Resolution Data Set of Soil Hydraulic and Thermal Properties for Land Surface Modeling
https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2019MS001784
-
We'll need to figure out how to expand the rootfs on first boot.
This is especially relevant for the Raspberry Pi images, but might also be relevant for the image for norns since that could run on a …