-
I am using python Paho client on my raspberrypi CM4 module. I have a question on the offline queue "mqtt_client.max_queued_messages_set(100)"
1. Will this queue only start to fill up when the conne…
-
raspberry CM4 and IO boards look very promising. I thought since you made dAISy you might be able to design a more complete board.
https://www.raspberrypi.org/products/compute-module-4-io-board/
…
-
Any plans to add the Hirose connectors to a RPi CM4 instead of the GPIO? An all in one board with a 18560 battery would be nice!!
-
It would be awesome if you could choose to use either rpi zerow or a CM4 module. Maybe you could make a conversion carrier? The volume seems to jive. I guess heat might be an issue though.
![imag…
-
Hi. I have a working custom RPI CM4 board. CB1 module (v2.2) after power on eats 120ma from 5V bus and it looks like it can't start. RX/TX shows nothing, hdmi/ethernet nothing. I tried to set usb boot…
-
Hey all,
hey all, I drive 145 leds WS2812 using SPI on RPI CM4, but all time i have first LED in string green (LED is ok, i try other string).
If i check signal on oscilloscope i see that MOSI is h…
-
Using the same CM4 carrier board with a dedicated PCIe slot, I am able to boot normally via a USB enclosure with an NVME drive into PINN but when booting with the same NVME drive in the PCIe slot I re…
-
**Is this the right place for my bug report?**
I guess
**Describe the bug**
We use a PI7C9X2G404EV PCIe switch with the CM4 IO Board.
When we boot, most times the kernel panics when accessing th…
-
I don't know what to say, other than it's a Tux-based Linux computer, the [Tux4Pi](https://www.tux4pi.com):
That's... literally it. That's the computer! Here's a shot of the board:
![photo16…
-
I have a Radxa CM3, which has a RockChip RK3566. I want to test it with some things, for science. This issue will be a compendium of all my knowledge.
![IMG_5595](https://user-images.githubusercont…