-
I was able to build your firmware, but I am not really familiar with CY7C68013A, can you describe how can I upload the firmware on the CY7C68013 chip?
-
I also tested `sys-2-crypt`, `make` worked, wrote `whole.img` to a USB stick. At bootup, it asked for a passphrase, however, the keyboard was dead.
This is on a PC with a UEFI-BIOS HP motherboard, …
-
SB_GB_IO has a much lower (and completely predictable!) delay than SB_IO + SB_GB pair we are using now. In fact, using the latter pair has been observed to (rarely) lead to selftest failures due to se…
-
Issues are for bugs in syzkaller itself, for everything else please contact syzkaller@googlegroups.com mailing list.
Before filing an issue please check the existing issues and the mailing list (ht…
-
Hello,
I rune muse 2.1.2-3, on Debian stretch. https://packages.debian.org/en/stretch/muse
When I start muse I get a message about the timer that is 250Hz while it must be 500Hz.
Muse fallba…
-
Hi all,
I am following the steps described in https://libvirt.org/kbase/launch_security_sev.html to enable SEV in the kernel of my AMD Ryzen 5 PRO 2400G (with Ubuntu 18.10). However, for some reas…
-
- Cilium version (run `cilium version`)
`1.5.4`
- Kernel version (run `uname -a`)
`Linux ip-172-21-53-107 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64 GNU/Linux`
- Orchestration s…
-
Moving the Hantek 6022Bx related work from #6 here now.
Current work regarding the support can be found in the following repos:
- https://github.com/olerem/openhantek/tree/6022be: @olerem (6022 suppo…
-
I have used kernel version 4.14 and still can not get a ocssd device.
What's the problem?
`./nvme list`
```
root@genericarmv8:~# ./nvme list
Node SN Model …
-
All configs are missing nftable modules needed for router use.