-
### Describe the problem
I haven't had time to play with the dbus-serialbattery driver for a bit until recently, I installed the latest nightly v1.4.20240629dev from mr-manuel's repo, and there is …
-
### Describe the problem
My system: EasySolar-II GX, 6 x 50 Ah 17s LiFePO4 with JBD (Jiabaida) SP22S003 BMS. BMS communication is BMS UART Isolation module ADUM1201 Generic USB to TTL module USB…
-
### Describe the problem
The rs485 communication doesnt want to work with raspberry or venus gx tried both. The bluetooth communication works but is unstable it drops out twice a day and VRM portal o…
-
### Describe the bug
Hello i have problem with connecting to jkbms_ble
### How to reproduce
if I text these to putty everything is work:
/opt/victronenergy/dbus-serialbattery/dbus-serialbatt…
-
Multiple RS485 modules on the same interface
-
Anybody have information about protocol or some else.
[BASENGREEN-48V-DIY-KITS_User_Manual.pdf](https://github.com/user-attachments/files/16519075/BASENGREEN-48V-DIY-KITS_User_Manual.1.pdf)
What…
-
### Describe the bug
The driver throws various python exception on start:
### How to reproduce
Start the driver with the config.ini from below
### Expected behavior
No error messages.
### Driver…
-
### Describe the problem
Describe the problem
A connection problem occurs several times a day (NO BMS). after a restart everything works again. After some troubleshooting it seems the bms is goi…
-
Integrate the Tian Power BMS via RS485 to Victron Venus OS-equipped devices.
- [ ] SOC
- [ ] Battery voltage
- [ ] Charge/discharge current
- [ ] Temprature
- [ ] Min/max cell voltages
- [ ] p…
-
### Describe the bug
Hello, I have a problem with the current display with my Daly 4S. With the Daly app everything is ok, when I connect it to the Raspberry the charging current/discharging is displ…