-
Hi,
This is not an "issue" per se but I don't know where else to ask this question. Sorry for spamming you with issues. I would like to be able to use evsieve with barrier (the keyboard and mouse sh…
acama updated
2 years ago
-
I know this is a bit of a long shot, but it never hurts to try!
So, I noticed that `ddcutil` has multiple builds with exactly the same version number. See, for example, builds [1506802](https://cop…
Crote updated
3 years ago
-
In order to use vesa MCCS (monitor communication) for controlling external displays. The linux user space apps (like ddcutil) need a device node to access the displayport aux channel.
For a lot of…
-
I am able to change some settings like:
```
Feature: 12 (Contrast)
Feature: 16 (Video gain: Red)
Feature: 18 (Video gain: Green)
Feature: 1A (Video gain: Blue)
```
but not
```
…
-
Asan found this baby:
```
=================================================================
==62810==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000007091 at pc 0x7f167dd1795e b…
-
Hello,
I have recently changed CPU and GPU and have only 1 monitor out of 3 work in ddcutil. All monitors are detected properly but only the monitor on bus 4 (VW225) responds properly to DDC comman…
-
When I use `ddcutil detect` the output is prefixed with a hexdump. I am using a tiled display (LG 34WK95U-W.AEU), and only one "display" is recognized as usable. (Which is fine.) However, because of t…
-
The `--enable-displays-cache` seems to be enabled by default. I have two monitors, I powered one down, which results in:
```
% ddcutil detect
Invalid display
I2C bus: /dev/i2c-0
DRM con…
-
The ddcui Github link in the documentation at ddcutil.com page points to https://github.com/rockowitz/ddcuui.git rather than https://github.com/rockowitz/ddcui.git
-
Hi,
is it possible to ignore certain monitors in the widget? I have an issue with internal display which flickers everytime DDC is used, so this widget causes this flicker every minute.
Is it po…