-
I resolved the issue for myself by adding
`
RFPiLightdata.set("message", (char *)message.c_str());
#ifdef valueAsASubject
StaticJsonBuffer jsonBuffer2;
JsonObject& RFPi…
-
I was trying to load a csv file with the csv type and I'm receiving NPE, I have attached the project for debug, but:
```js
Scenario: Working
* text foo =
"""
test_id,offer_name,affiliat…
digoo updated
4 years ago
-
I have a D1 mini and plan to use it with MQTT and openHab as the main hardware interface for a house alarm system. The idea is to have the currently installed hard wired PIRs feed their N/C outputs in…
-
## The problem
A lot of my MQTT sensors are unavailable after a restart. The solution to get them back is to delete the entity, and resend the discovery message.
## Environment
- Home A…
-
I bought a DIGOO DG W30, took it apart and noticed two things:
- it is using a "GOKE 7102" SoC (this means it will not work with openfang)
- one of the two antennas is fake
So i do not recommend …
-
I have a Raspberry Pi 3, and installed nexus433 with a RXB6 receptor. It worked perfectly on the first attempt and was able to recive the data from 3 Digoo DG-R8H sensors.
After a few days I ha…
-
I've got a couple of Digoo M1Q cameras, which support onvif. I want to use these cameras in Homebridge, but I cannot get it working properly.
When using `debug: true` and attempting to run the comm…
-
### PROBLEM DESCRIPTION
For the benefit of the community. I recently purchased a Digoo NX-SP202 on aliexpress here
https://www.aliexpress.com/item/32952717922.html
It seems to be the original m…
-
For Tuya plug: https://www.amazon.com/gp/product/B07B9XCY5M/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1
{ "Tuya Smart Plug1", // Tuya S01 or AWP04L with Energy Monitoring
//ht…
-
My digoo sp-202 was working perfect and power monitoring also working perfect but after reset itself by the power cycle reset. Power monitoring not working at all. I am using same template before I us…