-
The TYT UV-390 and family use squelch on DMR channels. QDMR seems to reset the squelch every time when writing to the radio to zero. It would be nice if the squelch value was stored in tytExtension or…
-
I have set up four roaming zones that I filled by selecting (sometimes the same!) "Add DMR channel". This fills the "Roaming channel" list automatically. When initially setting up the zones, everythin…
-
Following addition will add active channel display to the ncurses terminal when decoding any sort of trunking based signal. Currently, this is done with P25 and EDACS, but I am going to expand it to c…
-
Was fooling around with some MPT1327 channels in the 454 MHz band. Despite de-selecting them, the tuner shows as LOCKED in the "tuners' window, with no check mark in the Playlist editor appearing for…
-
Tab "Roaming Channels" -> Column Heading for "TS" and "CC" need to be switched?
The displayed *values* seem to be correct, it just seems to be the column description that needs to be switched? Sinc…
-
When uploading a code-plug to my Anytone AT-D878UVII Plus the APRS frequencies stored on the device get reset.
Reproduced with qdmr at https://github.com/hmatuschek/qdmr/commit/a335412e6c760300757a…
-
I was programming my AT-D878UVII when encountered a problem with APRS config. When uploading to the radio, the `APRS -> Upload Type` got set to `Sel D Aprs` which stands for uploading aprs via the DM…
-
I'm trying to decode a MotoTRBO Capacity+ system. I've entered the three frequencies given by RR and assigned the LSNs to the appropriate channels. I never hear any audio. I have tested the audio outp…
-
Hello Henry,
This is fantastic work. Thank you for providing the code base and the BodyPressureSD dataset.
I had a few questions related to the modeling experiments.
1. I understand that a…
-
I live in a dense metro area, another DMR system shares some channels with the system i'm interested in. Sometimes dsd-fme gets confused and follows the wrong control channel. It would be cool if we c…