-
![Invalid body assignment](https://user-images.githubusercontent.com/8471168/103364637-477a3400-4a8c-11eb-94f1-b5932543365d.JPG)
![Invalid data error](https://user-images.githubusercontent.com/847116…
-
Easytouch2 8
Can start "Super Chlor" function just fine from dashPanel, but for the time period set for super chlor, I can not turn off pool. The pool is locked out by the super chlor function.
…
-
**Pool Equipment**
- Controller: Nixie single body
- Controller Model:
- Controller Firmware Version:
- Pump(s) manufacturer and model: Pentair
- Chlorinator: AquaRite
- Heater(s): none
…
-
I have poolController running with dasPanel and webClient. I also have a Autelis interface for the Easytouch panel.
Bought a Hubitat Elevation and got "bsileo/hubitat_poolcontroller" running.
Th…
-
**Describe the bug**
an (animated) picture is worth a 1000 words. Check out the mixing timer in this gif
https://media.giphy.com/media/VKq3DtHdVJ9vFAzvFq/giphy.gif
**To Reproduce**
Start a manu…
-
**To Reproduce**
In dashPanel:
- change pool setPoint using the +/- (or manual entry)
- it will revert to original value
**Expected behavior**
new setPoint will be committed
![ezgif com-gi…
-
Issue: In the nixie scheduler when setting the on/off times the minutes are not changeable while in the 12:00pm hour. When you try, it automatically reverts back to 12:00pm. For instance, if you set …
-
Previously reported here;
https://github.com/tagyoureit/nodejs-poolController/issues/228
At times the PH and ORB readings are not updating, at times they do.
Also the Intelliclor shows green afte…
-
I'm new to this project so I may be missing something obvious.... I have a raspberry Pi connected to an Easytouch control panel via a USB to RS485 adapter. I have installed nodejs-poolController-mas…
-
Connect a Easytouch Lite EZPL4 board P/N 522523,
In Dash panel, select "Reload Config" on "Systems" tab of Settings, and the
board shows as "Unknown OCP[7,13]