-
Hello,
nice work.
I was curious to test your component, but obviously I ran into an error that causes the ship to boot.
```
Thread
7 "loopTask" received signal SIGTRAP, Trace/breakpoint tra…
-
Hello Frans,
I've been struggling with this ESP32 for the past 5-6 hours and I'm not sure what am I doing wrong. Blow are my config and then the error I'm getting when I tried to flash the config.…
-
Hello
The attached config file builds and runs on the shelly 1 plus pretty well, without the add of the awox line in the end.
When adding the awox part, taken from https://github.com/fsaris/EspHom…
-
Hello @fsaris its been some time.
First let me thank you for this new solution to control Awox devices.
The first feel is very good in compare of old Awox integration so very good job. :)
Now t…
-
This is my ESPHome File:
```
esp32:
board: wemos_d1_mini32
substitutions:
name: esp32-bluetooth-proxy-35ba64
packages:
esphome.bluetooth-proxy: github://esphome/bluetooth-proxies/esp32-g…
-
### Link
https://www.bosch-smarthome.com/uk/en/products/devices/twinguard/
### Database entry
{"id":76,"type":"EndDevice","ieeeAddr":"0x000d6f00179e01b9","nwkAddr":43776,"manufId":4617,"manufName":…
-
Hey!
disclaimer: i understand that this might be too tangential to this repo so feel free to close it as not relevant :D
My HA server is too far from my lights and I'm still trying to battle th…
-
Link : [Eglo PADROGIANO-Z ceiling light](https://www.eglo.com/en/ceiling-light-padrogiano-z-900481.html)
Device signature
```yaml
{
"node_descriptor": "NodeDescriptor(logical_type=, …
-
### Link
https://www.zigbee2mqtt.io/devices/12242.html
### Model
ST64
### Description
Light Bulb
### Vendor
EGLO/AwoX
### Picture (link)
https://www.zigbee2mqtt.io/devices/12242.html
### Dat…
-
### What happened?
I bought 3 identical ceiling lights (not bulbs but I guess they use the same controller) from EGLO.
Two of them pair as AwoX 33957, which was surprising at first but I read on…