-
Random printer reboots keeps happening since "upgraded" from 1.2.5.1a to 1.2.5.1b however not when a print is running thankfully just when in the menu system doing setup things. The unplanned reboot…
-
I just tried pushing the code to an Arduino Clone an Elegoo Mega, it starts up and reports the test cycle on the serial port, but the LED all go off at the end of the test cycle and the LEDs cycle on …
-
I downloaded the zip and there is no data on files.
-
Hello, I have a led stripe with an Arduino R3 (Elegoo) working under W10 &W11 using prismatik. But I can't found the way to work under an M3 pro with macOS 14.1.1
I'm able to run the wizard, I set …
-
Both the downloads for Mac are damaged upon install and not able to be opened. I'm using a Macbook Air M2 with Sonoma 14.2.1 (23C71).
-
打开gocode文件内容,发现elegoo切片软件生成的带预览图的文件里面是qimage和simage,并不是其他切片软件支持的png格式(比如prusa),希望加入png预览图支持
-
### Description of the bug
Problem with the 0.5 scaled box after slicing
![1](https://github.com/prusa3d/PrusaSlicer/assets/44905692/ea8e9465-ddce-4cf1-b7aa-e2c9075211ea)
![2](https://github.com/…
-
To get you started: https://www.thegeekpub.com/16349/arduino-traffic-light-project/
Requirements:
1. Create a new folder in the GitHub root directory to store this project. Commit your code, wh…
-
I'm having difficulties flashing v1.5.6 to my MaxMix device. The two issues I'm writing about here are _probably_ unrelated, but I'm not certain.
I'm hoping someone might have some insight into the…
-
### Cura Version
5.3.1
### Operating System
Windows 11
### Printer
Elegoo Neptune 2S from here https://github.com/NARUTOfzr/ELEGOO_Neptune2_Cura
### Name abnormal settings
This on…