-
Via MQTT Discovery the v0.1.1 implementation reports the voltage of the battery powered devices in Volts with a fixed battery icon. It would be good if the icon reflected the charge state of the batt…
-
I cannot see when/which commands are needed to make the MIHO013 eTRV will return the "VALVE_STATE", can you please confirm?
-
Hi,
Thanks so much for this, it is working so well and is such a nice way to clean up and simplify the ener314rt intergration.
The recent addition off the HA autodiscovery for FSK devices is so …
-
Whilst testing mqtt-energenie-ener314rt I noticed that receiving of messages sometime stops for a while. I believe this is because the buffer on the ENER314-RT does not always get fully emptied when …
-
Hi,
First day using NodeRed with the ENER314-RT integration which works perfectly with my Light Switches and Whole Home Monitor, Ive just added one of my PIR Sensors to my Flow and whenever the dev…
-
I've experienced a bug a couple of times whilst running the MQTT app for a while with monitoring enabled. It seems that devices can stop receiving commands correctly, yet the transmit light is still …
-
I'm currently developing a solution for MQTT discovery (Issue #1). It will work very well for FSK, aka 'Monitor' or 'Control & Monitor' devices as they get auto-added to an internal deviceList. The …
-
I cannot seem to queue commands for MIHO013 eTRV, I have tried having two instances of the same node, but I see this is a limitation.
Can I check this is correct?
![image](https://user-images.gi…
-
Allow commands to be passed to eTRV, utilising the command caching as applicable.
-
Add support for home assistant (hass.io) via the home assistant node-red module.
Initial tests are failing, I suspect this could be due to access restrictions to GPIO / SPI.