-
### Feedback
Just saw on the momnthly release from Home Asistant that Voice is not supported on S3-Boxes. Well, it does not work. I get a "No Wifi" message as after I connect to the S3-Box's wifi - i…
-
Docs: https://espressif-docs.readthedocs-hosted.com/projects/esp-adf/en/latest/design-guide/dev-boards/user-guide-esp32-s3-korvo-2.html
-
Hello Wolle,
when i power up the radio, In the BT menu, the Volume is always at 31. if i change it, it work at different value but it does not retain or save that value like it does when in radio …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
After a long search i goy this. Now i can use in esp32 s3❤️
-
There are some challenges with getting the code to run correctly on the most popular ESP32-S3 dev boards sold on AliExpress etc. First of all, where possible, you should order the N8 version, which wi…
-
I have reinstalled 5 times activating only ESP32-S3, ESP32-S2 and ESP32-S3, ESP32 and ESP32-S3, all ESP32 series and whatever the case, it is always the same result: in IDF target menu of Espressif ID…
-
Board: LilyGo T-display S3 --> Board manager setting: "ESP32S3 Dev Module" with the right Tools settings
Arduino IDE version: 2.3.2; CLI Version: 0.35.3
TFT_eSPI version: 2.5.43; previous version: 2…
-
I' having some issues trying to use the CAN library with my ESP32-S3. When I run the ino file it gives me these errors .
**new bugs : C:\Users\gag_a\Documents\Arduino\libraries\ACAN_ESP32\src\AC…
-
the device not booting up shows nothing after fresh the firmware, tried several times, no luck
esptool.py --chip esp32-s3 --port /dev/cu.usbmodem2301 --baud 115200 write_flash -z 0x1000 acid-drop_v…