-
### Category
Hardware Compatibility
### Hardware
T-Deck
### Firmware Version
2.4.2.5b45303 Beta
### Description
The T-Deck Plus is the T-Deck in a case with a battery and soldered on GPS module…
-
Hi all. I get different types of errors and restarts at random. I use the webserver to send out a html page. In this page there is a connection to a websocket and then the ESP32 will send out the temp…
-
Just for anyone passing by, Ditoo is compatible with almost 100% of commands.
OFC Keyboard lights controls is not available, since it wasn't reverse engineered as it was not something compatible ei…
Write updated
7 months ago
-
I am trying to flash from active branch, and getting this error, 'USB_VID' was not declared in this scope.
How can I fix this?
The main branch does flashes successfully and wifi becomes available b…
-
I am trying to compile your code, but it gives an elapsedMillis library error all the time.
I can see the library is installed(/esp32-s3_usb-keyboard-to-mqtt/.pio/libdeps/esp32-s3-devkitc-1/elapsedMi…
-
**Describe the bug**
After updating from v3.6.3 to v3.6.4 the device disconnected from WiFi after about 2 hours.
**Upload your config**
'{"version":"v3.6.4","serialnr":6972,"mode":"SMART","mode…
-
### What happened?
when page update happens the Live-Data page doesn't actualize all values
based on too fast closed issue #728 which continues (cant find how to re-open)
### To Reproduce Bug
…
-
I tried the IDE using WebREPL and generally it works fine. Even If I do not use IDEs at all for MicroPython, I can admit that is is usable. I tried it with an ESP8266 and W600. For ESP8266 it works we…
-
Hello,
Got a problem where the thermostats are not visible through ESP Home Bluetooth Proxy integration.
The Thermostats were successfully paired using the BT from the server, communicated, all go…
-
I'm trying to connect with my Voltronic Axpert VM III 3000/24 with a Esphome device.
I get this error: "INFO ESPHome 2023.12.5
INFO Reading configuration /config/esphome/esphome-web-a65af0.yaml...
…