-
Specified in the firmware serial port 6. But there is a problem, according to the scheme on the connector pins ch_en, RESET, etc. at start on a pin PG0-CH_EN 0, because of what Wifi Does not start. If…
-
I wanted to change the eeprom settings in Repetier-Host through Wifi connection, but it is not possible, the window is empty. The M503 command has only OK respose.
![Repetier-Host](https://user-ima…
-
Hello.
I'm hoping you'll eventually release the source files of the firmware so the community can modify it to suit whatever upgrades we may install on this printer. Currently, I only see pre-compi…
-
Good day friends,
I am in the process of doing a complete overhaul of my Ender 5 Plus. I am going with the SKR E3 Turbo, 24v BTT UPS, and very large hotbed MOSFET (I didn't realize the size when I or…
-
I've had a mks tinybee for some time. terrible board, based on the esp32, it does not even support babystepping and mesh bed leveling, but the one part i absolutely loved about it was the esp3d. I'm t…
-
When uploading file to SD card through esp-01 wifi module send printer into error.
This can be reproduced by entering the command "M28 test.gco" in the command console of the printer.
An empty fi…
-
I received an email asking about TMC2209 drivers in UART mode. I thought it best to move the conversation to a more public space so that the collective wisdom of the open source community can be harne…
-
What kind of issue is this?
- [ ] **Question**.
This issue tracker is not the place for questions. If you want to ask how to do something,
or to understand why something isn't working…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
If you copy a gcode file trough wifi and if its name is 5 or more characters long the copied …
-
I am using the Neptune 3 for about 5 weeks now. It works so far, but for more convenience I would like to have the WIFI Module working as it seems to do on the Neptune 2 etc. .
I already installed t…