-
Title. If the machine was running when the software bugged out then output 4 is never refreshed to logical boot state.
-
Currently our input feedhold is initiated on the leading edge of the input signal, then resumed with the resume button. Even with the button held down, you can resume the program. Through discussion w…
-
These are the up/dn indicators for incrementing or decrementing numbers that also display a validation failure if a decimal entry is out of sync. Turning off the error messages causes the spinner to o…
-
This is the program I was using when I realized this.
SO, 1,1
PAUSE
PAUSE 1
MZ, 0
MX, 10
MX, 0
MZ, 0.5
END
Run the file, authorize, Then the first pause message will pop up. Hit resume, t…
-
If you hover over the x,y,z axes a help message will appear, "Please enter a valid value, the two nearest valid values are 0 and 1". This message is kind of misleading because any value down to the 3r…
-
Lower right semi-circle near stop button. Using safari on iphone 8.
![5920BACE-6349-49DF-B5BF-A0606D9C66A8](https://user-images.githubusercontent.com/73403072/167157494-6bee2f18-b483-47ad-bd21-1b…
-
Here's what I have been seeing with the new image. Don't know how much of this is specific to my home network (which is pretty ordinary).
Possible issue with IP reporting in wireless name when usin…
-
Connecting to:
http://192.168.33.103:3141?0.6965174878579328
results in a 500: Internal server error.
This is the address where we run the usb camera server that the fabmo video app accesses.
-
in ...97c123-rc
A macro with a syntax error such as the following:
SO, 1,1
PAUSE, 10 (no comma here)
... will correctly evoke an error when the macro is run, but when t…
-
Number format error required me to restart fabmo completely. On other machines I am used to having 4 increment buttons, .1, .01, .001, and .0001. This eliminates user error when adjusting fixed axes m…