-
The current breathing light goes from 0% to 100%.
Change it so it matches the official mute me
- [ ] Breathing slow
- [ ] Breathing fast
https://makersportal.com/blog/2020/3/27/simple-breat…
-
Hi thanks for this project. but I cant compile and getting error when compiling
```
Arduino: 1.6.7 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200, 4M (3M SPIFFS)"
WARNING: S…
-
### The problem
The `name=source` syntax for specifying an alternative git source for a library is not working. Using the exact example from the "ESPHome Core Configuration" documentation page (i.e. …
-
The FastLED library can support up to eight strings of lights, each attached to 8 different I/O pins. The strings should be able to act as mirrors of each other or each string to be concatenated to th…
-
new to Arduino and getting this message after trying to verify the coding any help please would be much appreciated
Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "Generic ESP8266 M…
-
Minor issue, easily worked around and probably easily fixed in the library: I am controlling four WS2812 LED strips from a Teensy4. The Arduino 1.8.12 environment with Teensyduino 1.51 reports "FastLE…
-
Hi,
I am using AttinyCore (using an attiny2313a) and FastLED library. Once I've added the blank sketch with the FastLED library included it will compile fine with no errors. As soon as I add the "Col…
-
-
Since these things are so widely used, I thought somebody must have already written some code using them with automaton. I haven't found anything yet. Can you point me to any example using either th…
-
**Describe the problem you have/What new integration you would like**
I would like to see support in ESPHome for the FastLED library gradient color palettes. See here: https://github.com/FastLED/…