-
We can probably get the bit rate up quite a bit from the current FSK DAC implementation by switching to QAM encoding with perhaps 4 possible symbols (using 2 phases and 2 amplitudes). The current driv…
-
I'm working on duplicating the examples from [Fuzzing the Unfuzzable](https://hackernoon.com/afl-unicorn-part-2-fuzzing-the-unfuzzable-bea8de3540a5) and ran into some missing parts:
* `FSK_Messagin…
-
I have several RS41-SGP (F100 chip) sondes with the daughterboard. I would like to read all sensor data and send APRS weather data directly from the Sonde. I understand the APRS mode is not supported…
-
Hello,
I would like to ask you, if you've tried to implement receiving using GNURadio Companion blocks. I'm trying to use a different tools (scapy-radio), however its blocks are only for 40Kbps|FSK…
-
Change the line break in the title, so that it reads:
D-Cinema Operations —
FSK Synchronization Signal
-
There is some success as written in [that](https://www.reddit.com/r/RTLSDR/comments/k9dmz9/master_meter_water_utility_meter/) tread.
I had no luck: Using rtl_433 -f 916.0M -s 2400000 -g 280 -a 4 -X "…
-
would it be possible to to add 4 Level FSK Demodulator?
thanks in advance
-
-
Received my device today :) Works well out of the box!
I see no "chat" for the Web-888 so I am writing issues here on the few things I see ( I saw a reddit, but it seems to have been killed by the …
-
/opt/GW-Lorawan/lora-sx1276/SX127x/board_config.py:58: RuntimeWarning: This channel is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings.
GPIO.setup(BOARD.LED, GPI…