-
We currently display a generic error message when an error occurs during data model generation.
I suggest improving the error messages by providing a specific message for each type of common error (e…
-
Hi,
I have a question about the API for striping comments from python code. Per default comments starting with `#` and terminated by `\n` are not filtered out.
How do I achieve that?
Thanks!…
-
Hi thanks for your great software. After setting up the spindle on the corner of material, It goes up and down or somewhere else on starting g-code. how can I fix this problem?
Also, I'm looking fo…
-
Hi,
I've been using Pronterface to command printers that use an Arduino Mega + RAMPS.
Arduinos are definitely efficient and cheap, however they only have 5 stepper motor outputs, which prevents me f…
-
```js
test case:Module["asm"] = (function(global, env, buffer) {
'almost asm';
var STACKTOP=env.STACKTOP|0;
var STACK_MAX=env.STACK_MAX|0;
var HEAP8 = new global.Int8Array(buffer);
va…
linzj updated
5 years ago
-
Thanks for this plugin. Made my life a lot easier.
I was looking at the GTAG code and I was wondering why the main methods were commented out. Is that on purpose or is it by mistake? It might be me…
-
Please consider adding an option to insert custom g-code after each M6 command, similar to e.g. existing preamble:
```
--preamble filename.ngc
gcode preamble file, inserted at the ve…
-
The first line in generated G-code is "go to offset". Usually it's `G0 X0 Y0`.
When entering negative offset implemented in #160 the first line of g-code is that negative number. If image imported h…
-
GRBL has some additional commands like $I or ? and some other idiosyncracies.
- [ ] Send replies to LightBurn when GRBL-specifig codes are received
- [ ] LB sometimes sends only X123 without G1 be…
-
**Is your feature request related to a problem? Please describe.**
G-Code itself is quite simple. But syntax highlighting can help to make it easier to skim through.
For example, comments might ta…