-
## Hardware and versions
* Inverter model & generation: GIV-AC3.0
* Inverter firmware version: D0.535-A0.535
* Battery firmware version: 3015
* Home Assistant integration version: 2.0.3
## Desc…
-
**Is your feature request related to a problem? Please describe.**
We do not have solar (low priority as East/West roof and high latitudes in Scotland providing limited benefit in the winter months a…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
Hello
So it works fine for a few days but then stops working...
Added 0 rows to database table sensor_givtcp_ch2330g177_load_energy_today_kwh
Stored dataset in database and retrieved full histo…
-
**Describe the bug**
I am running the standalone predbat add on.
I am experiencing continual warnings for their 'historical day' data.
I get warnings every 5 minutes as predbat updates its plan. …
-
**Describe the bug**
Predbat shows the battery as 'discharging'. However, in the GivEnergy dashboard it shows the battery as idle and the house as running off the grid.
Read Only mode disabled, pr…
-
*I have experienced status reports and warnings in my predbat.log related to unsynchronised times between my inverter time and appdaemon time.
Could these be connected to my automatic upgrade to Pre…
-
2024-06-12 19:40:00,862 - startup - [CRITICAL] - HA MQTT Service has been found at core-mosquitto
2024-06-12 19:40:00,864 - startup - [INFO] - Supervisor Timezone: Europe/London
2024-06-12 19:40:02,…
-
Added an EVC to my Gen 1 inverter running old firmware.
It gives no serial number error for the EVC.
Does the EVC only work with the new firmware?
When I set the inverter to new firmware the inv…
-
I have noticed that if there is a charge window active and predbat runs a scan and changes the mode to "hold Charge" or "idle" it continues to keep charging the battery until the charge window end t…