-
I'm not familiar with WireGuard config syntax but according to https://www.wireguard.com/ `.conf` file space before and after `=` and as mentioned here is can create error https://forum.gl-inet.com/t/…
-
*ivanich:*
Device: GL.iNet GL-MT1300 added with https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d89a7f0120db42d4fae1656e1860ef49523acabb
The problem is that luci wireless app configure…
-
In [`6916435`](https://github.com/Admonstrator/glinet-uptime/commit/6916435a8a36de1b585faf37e5ebb75fd59bd3a2
), GL.iNet Forum (China) (https://forum.gl-inet.cn) was **down**:
- HTTP code: 0
- Response…
-
I think the version for OpenWrt routers may no longer work. I set up Freedom Portal on a GL-inet MT300A router as per the instructions (and with latest firmware for the router - v2.265). The WiFi hots…
-
### Describe the bug
When using full stack IPV4 MAP-E, mapcalc returns too many PORTSETS with port above 65535, see below.
When I move from Linksys WRT1900ACS to GL.iNet GL-MT3000, I have my MAP…
-
The NUC (probably) cannot connect to a Wi-Fi network (for internet) and serve a hotspot simultaneously. This is an issue when running in hotspot mode (especially when updating from a USB drive).
Wo…
-
### Describe the bug
The GL-AR750 contains a micro-SD card slot attached to a USB Genesys Logic controller. As the `kmod-usb-storage` isn't part of the standard image, the card is inaccessible until …
-
### Describe the bug
In the Device Tree for the GL.iNet A1300 (Slate Plus), the side switch's GPIO pins are configured to map to `KEY_SETUP` (see [here](https://github.com/openwrt/openwrt/blob/main…
-
I'm trying to install the meshagent on a GL.Inet GL-AX1800 running a Qualcomm IPQ6000.
I've tried installing the meshagent in the same way I've done it for my older AR-750S by downloading the agent f…
-
这个很好！可以做一个Install-Openclash-for-MT2500的sh？谢谢！