-
I triggered a SEGV bug when fuzzing gobgp.
The config of the under-test node is as follows, and its IP is `10.0.255.6`
```
[global.config]
as = 65001
router-id = "192.168.10.6"
[[neigh…
-
Hi, I build the ibgp environment of two host "192.168.0.1, 192.168.0.2",
and the host 192.168.0.1 is a juniper route, the host 192.168.0.2 is gobgpd.
the results of ./gobgp neighbor 192.168.0.1 …
-
Today the relation of Start, Stop, Serve and Shutdown is not immediately clear for an end user, making it difficult to use GoBGP as a library. I propose the GoBGP team defines the intended responsibil…
-
It seems to me that the way GoBGP handles VRFs is not correct. Let me illustrate this by describing two work-flows:
**Handling receipt of a BGP update message**
- How GoBGP does it according to …
-
The tests in:
- `pkg/bgpv1/test` ("BGP component tests")
- `pkg/bgpv1/manager/reconcile_test.go` ("Reconciler unit tests")
bind to ports above 1023 (in particular: `1790-1794`). This can cause is…
-
Hello,
Doing a experiment. I have 7 devices(1,2,3,4,7,8,9) ,have 3 devices(1,2,9) have all link to the other 6 devices.Each of the other 4 devices(3,4,7,8) has 3 links to these 3 devices(1,2,9),and …
-
gobgpd version:2.33.0
configure:
[[bmp-servers]]
[bmp-servers.config]
address = "192.168.4.136"
port=5000
route-monitoring-policy = "all"
tcpdump captured bmp packet:
![16376…
-
We have a kubernetes cluster running calico with mesh mode disabled, meaning that we have a number of nodes running `bird` bgp instances that are not communicating with each other. Each `bird` instanc…
-
It looks like GoBGP installs VPNv4 routes learned from a route-reflector into Linux kernel’s default forwarding table via FRR/Zebra.
[ashaikh@vsp-vpe-west ~]$ gobgp global rib -a vpnv4
Network …
-
hello,
Just started playing around with gobgp, and i've installed version 2.25.0, and I have the below MRT config set on my system:
```[[mrt-dump]]
[mrt-dump.config]
dump-type = "table"
…