-
hello one and all,
i'm trying to reproduce "A more complex example" with an actual Keithley 2000 using GPIB0::20::INST as in https://pyvisa.readthedocs.io/en/latest/introduction/example.html under …
-
This means errors cannot be caught upstream, which is not good. I briefly tried to fix this but letting them error out, but it seems like a more thorough investigation must be done. The GPIB Device …
-
I finally tracked my scope issue down to bad parsing of the binary waveform data. There is a function 'query_binary_values" built in to the VISA driver that queries data and parses it correctly.
I'v…
-
Hi,
I think I have detected an incompatibility between the AR488 and the Prologix adapter that seems to cause an issue with the KE5FX VNA toolbox.
The issue is with the ++spoll command. The KE5FX …
-
I'm trying to dump trace data in ASCII format (command "DDAS"). This is discussed on pages 3-2 (PDF page 40) and 3-5 to 3-8 (PDF pages 43-46) of the below-linked Programming Manual.
In Tera Term, …
-
When my instruments are connected directly to my PC, either by USB or by GPIB-USB converter, I can communicate with them without issue. However, when I connect to them through the Keysight E5810B brid…
M4tt- updated
3 years ago
-
As a scientist on the RIKEN Front End I want to able to control the Stanford DG535 remotely.
**Acceptance Criteria**
1. There is an IOC to control the [DG535]("\\isis\shares\ISIS_Experimental_Cont…
-
Currently support for flushing input and output buffers is only implemented for serial connections.
The original pull request (#208) mentions that it should be possible to extend this support to TCP…
-
I tried connect my device using GPIB-USB-HS, got "Found a device whose serial number cannot be read. The partial VISA resource name is: USB0::3034::5924::???::2::RAW
()"
At 'sudo python' model, it w…
yexub updated
4 years ago
-
I recently managed to interface my oscilloscope (HP 54542C) via GPIB and convinced it to provide a 'screenshot' (hardcopy is their term) to me.
Obviously I want to convert the file to some more con…