-
-
https://groups.google.com/d/msg/gqrx/ynYZTObaeqw/ocOz3L0XDwAJ
The solution in this case was to open /etc/hosts in a text editor and comment out the line
`127.0.0.1 localhost`
Is this a genera…
csete updated
3 years ago
-
What chararacter encoding Gqrx is using for RDS data?
As a Finland-living person, I see all special Scandinavian characters (å, ä, ö etc.) as an 'unknown character' in the RDS data. Most local statio…
-
Attempting to play back some IQ files (rtl_sdr console tool recording in uint8_t format for example) leaves the DSP in incorrect state.
Steps to reproduce:
1. Prepare "bad" IQ file. dd if=/dev/ura…
-
Hello.
I bought the Cariboulite almost a year ago and since then, I had it in a drawer. I wanted this weekend to play with it and I gave it a go with a RPI4. Fresh image, installation worked fine, wi…
-
After installing Ubuntu 22.04 LTS and installing gqrx ("gqrx-sdr") from the repositories, gqrx crashes consistently on startup. It worked fine on 21.10. The SDR is a Funcube Pro+. Starting from the co…
-
I'm using Gqrx to test my new USRP N310 SDR, with following versions:
- Gqrx: v2.15.8-13-gf108a29
- Gnuradio: v3.11.0.0git-21-g120268de
- gr-osmosdr: 0.2.0.0
- UHD: UHD_4.1.0.HEAD-0-g6bd0be9c
…
-
Hi,
I just recently compiled gnuradio 3.7.7.1 and gqrx v2.3.2-110-g222b from source on ubuntu 14.04 x86 64bit. gqrx works fine with rtl-sdr, but I noticed a delay between the signal on the waterfall a…
-
It would be a great feature to set the Channel Filter Offset by Remote Control (Telnet).
So gqrx can be used for remote controlling a Transceiver.
Currently, only reading frequency from TRX (via tap…
-
Trouble with nrsc5 - Linux
Have been experimenting with nrsc5 and a RTL-SDR blog V3 dongle. Recently upgraded my aerial which is working well for analog reception.
Built and running nrsc5 on …
n1moy updated
11 months ago