-
**Describe the bug**
I've got a mosfet connected to a pin that's controlling analog led brightness. Ideally, I'd like to control the brightness of this one LED with monochrome effects or just bright…
-
## What happened
I have 56 zigbee devices.
Tradfri bulbs. More than 40 pcs
Xiaomi flood sensors
Xiaomi temperature sensors
Xiaomi buttons
Zigbee routers in every room
Issue 1
Periodi…
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem i…
-
I can see this was brought up in #235
But from what ive read the auto discover was fixed with no mention of the comparability to use home assistants MQTT_Json (https://home-assistant.io/component…
-
### PROBLEM DESCRIPTION
With release 9.4.0 the H804 PWB LED dimming module (sonnoff Basic) has started occasionally pulsing the RGB channels to full intensity every few seconds when the intensity…
-
I'm using a H801 LED driver board, which uses GPIO2 to transmit UART0 data. The following works:
```C++
Serial.begin(115200, SERIAL_8N1, SERIAL_FULL, 2);
```
While this does not:
```C++…
iliis updated
3 years ago
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the pro…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
I have tried the blink command.
Power1 3 is working fine. the red channel is now blinking, but Power2 3 gives m…
-
I have tried the blink command.
Power1 3 is working fine. the red channel is now blinking, but Power2 3 gives me an error:
10:35:15 MQT: stat/eingang/RESULT = {"Command":"Error"}
Device H801
Ta…
-
**Have you looked for this feature in other issues and in the wiki?**
yes
**Is your feature request related to a problem? Please describe.**
When using RGBW with H801 Device the White Statu…