-
Hello,
I'm using water heater with schedule, created by Econet native android app.
At the same time I would like to have possibility to control water heater via HomeAssistant.
Problem is: when I s…
-
Hi Guys, could you please include a bare minimum PID controller based on this REPO for the RPI?
I have found a blog entry for Onion here: https://onion.io/2bt-pid-control-python/
Please also che…
-
When adding the Mill heater (glass panel gen 3) using the Mill app, I selected the advanced option "Connect to cloud and enable local API".
I can open the web page against the heater using the 'htt…
-
If the Due is not powered but RAMPS-FD is, then the heater outputs (D8-D11) default to an on state.
Redesign FET control circuit to ensure that heater outputs are not active is Due is not powered.
bobc updated
10 years ago
-
### Govee Device SKU
H7131
### Govee2MQTT Version
2024.01.18-b83b7d15
### Describe the issue
After all of the changes, the add-on is working almost perfectly. One thing I noticed is tha…
-
Hi @vitotai
I just upgraded to 0.5.
While doing a test run, I noticed an issue with the sparge heating control:
After reaching temp for mash step 1, the sparge heater kicked in as expected. When I…
-
A quick comparison between the old and new cloud API shows less sensors in HA:
1. streamer mode
2. econo mode
3. delta D
4. dry keep setting
5. fan motor rotation speed
6. heat exchanger tempe…
-
I am running an skr mini e3 V2 with a stock ender 3 pro hotend and raspberry pi with klipper and mainsail. The printer was working fine like this. Yesterday I noticed both the bed and hotend immediate…
-
I am running just a single Shelly Plus 1PM with a child bridge. The accessory works fine in HomeKit (controlling an immersion heater) but the logs are filled with the message above.
Details:
[1…
-
### What happened
I have hybrid hardware, and it was initially enabled, but due to doing some debugging I set it to CoreXY mode.
Rather than changing my wiring, instead when I changed to corexy, I…