-
hi
will it work on heltec wifi kit 32 + amplifer PAM8403 ?
http://esp32.net/images/Heltec/WIFI-Kit-32/Heltec_WIFI-Kit-32_DiagramPinout.jpg
https://ae01.alicdn.com/kf/HTB18vzsaKH2gK0jSZJnq6yT1FXar/P…
-
Carroll and Garfield sensor went down in the field. Battery was fully charged and once reprogrammed, the heltec appeared to be functional. Conclusion is that the heltec got caught up in field and neve…
-
PIO Core Call Error: "The following files/directories have been created in C:\\Users\\user\\git\\test\\test\r\ninclude - Put project header files here\r\nlib - Put project specific (private) libraries…
-
I just received the LoRa 32 863-928 oled V3
I cannot get it working
Arduino IDE 2.2.1
Heltec board/library version 1.1.5
Heltec WiFi LoRa 32(V3) / Wireless shell(V3) / Wireless stick lite (V3)
A…
-
**Not sure if this is a problem with the library or the ESP32 support from Espressif.**
When trying the minimal usage example with the esp32 package v 3.0.1 and an ESP32-C3 board, I get continuousl…
-
Hi I'm unable to load the **package_heltec_esp32_index.json** via the arduino board manager. [Here](https://raw.githubusercontent.com/occino/WiFi_Kit_series/master/package_heltec_esp32_index.json) you…
-
The library worked fine on Arduino 1.0.6, but after upgrading to v2.0.0 the device reboots on the next loop cycle after calling `Arduino_LoRaWAN::SendBuffer()`. I have a `Lora` wrapper class which sim…
-
(base) edgar@edgar-inspiron3493:\~/pycom-micropython-sigfox-heltec/esp32$ make BOARD=HELTEC
Use make SECURE=on [optionally SECURE_KEY ?= secure_boot_signing_key.pem] to enable Secure Boot and Flash E…
-
The display uses the Heltec library
#include "heltec.h"
is instantiated with
Heltec.begin(true /DisplayEnable Enable/, false /LoRa Disable/, true /Serial Enable/);
and use the functions as
**Helt…
-
Hi
I tried to use an Lora Example provided by heltech on arduino IDE.
Somehow my Boards keep crashing with a checksum error:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),bo…