-
After upgrading the Apple HomeKit architecture, if the device is power cycled or disconnected from WiFi, it has to be re-added by going to “Add Accessory”, selecting the device and naming it. What rea…
-
Especially if you have a lot of other Homebridge sensors as well, it's likely that you'll (eventually) run into the per-bridge accessory limit of 149, like if you have 5 APs and 30 devices that have e…
-
Currently ADK requires you to define a number of (boilerplate) services and characteristics just to start writing the actual accessory logic which results in [huge copy pasted declarations](https://gi…
-
I'm trying to run a bridge with 14 blinds (as different accessories as I want to put them in different rooms).
These each have 3 services.
My setup can handle 9 blinds, from 10 blinds and above, t…
-
### The problem
My initial issue (integration completetly forezen wihout any indication in the sensor status in HA) with FP2 after upgrading to 2024.8 was resolved by @bdraco with introducing the new…
-
trying to add the bridge to HomeKit is giving the out of compliance error
all the a…
-
When i connect the iphone with the esp8266 running (example led or sonoff). It will pair and let me control the led i configured as output. This will work for a few minutes and after that the accessor…
-
`WiFi connected,` IP: 172.20.10.13
>>> [ 5890] HomeKit: Update the CPU to run at 160MHz
>>> [ 5898] HomeKit: Starting server
>>> [ 5901] HomeKit: Using existing accessory ID: 38:73:7B:C4:A6…
-
I'm using an esp32 and am trying to use the esp32/button example.
I'm using the currently latest stable esp-idf and toolchain on MacOS 10.15.6.
I've cloned the latest version of this repository and …
-
Works well for a short period of time. After a few hours the device lost the connection with clients.
Any suggestion?
Thank you
>>> [1755017] HomeKit: Got new client: local 192.168.0.32:5556, …