-
Hi there,
Sorry, maybe this is the wrong place to ask the question, but this is the best I could find so far.
Issue: my camera has ONVIF support, but as soon as I turn off it's access to the Inter…
-
### Describe the issue you are experiencing
I've just upgraded from 11.0 to 11.4. Everything went smooth apart from the fact that the wifi interrupt overlay no longer works (wifi device not visible…
-
@morrownr - I'm having a strange issue with the ANDDDEAR MT7612U004 adapter that I recently picked up where it won't initialize properly on the USB 3.0 bus of my Raspberry Pi 4B but it will work fine …
-
Greetings to anyone that reads this message.
It was reported that the rtw88 in-kernel driver for the rtl8821cu/rtl8811cu chipsets was broken. So... we decided to make it better. Five patches have n…
-
# ESPAltherma Community post!
> ESPAltherma is used all over the world! well... mostly in Europe... mainly in Germany ;)
> Let's show each other what we did with ESPAltherma!
> This will be nice …
-
As the title says. Here's an example:
```
$ cd ~/.platformio/platforms/ststm32/boards/
$ grep '"extra_flags":' nucleo_*
nucleo_f030r8.json: "extra_flags": "-DSTM32F030x8",
nucleo_f031k6.json…
-
Initial marlin configuration has **Z_MIN_PROBE_PIN** and I don't see in manual what should it be. Currently my BlTouch doesn't work because of that I guess.
-
Using ESP32S3 DEVKitC
esp-idf v4.4 6c5fb29c2c513936ecefa7cdf49fb324e316546e
ESP connect to hotspot as a client.
Randomly, the logs start printing
```
E (936951) wifi:AP has neither DSSS …
-
version: OpenWrt 21.02.3
kernel version: 5.4.188
my board have three PCIe device, just can use first 2 device, third device cannot detected
```
[ 1.298144] rt2880-pinmux pinctrl: pcie is al…
-
**Describe the bug**
When levelling with a z-offset of anything other than 0, it affects the way the mesh is produced. Consistently reads one side MUCH higher than the other, seems to flip around fro…