-
Hello,
I am planning to use this in esphome, but I want it to work on esp-idf framework as well.
So, obviously I will have to port it to esphome universe (components, i2cdevice, etc).
Are there a…
-
### Describe the issue you are experiencing
Hey,
Getting crazy here. First of al many thanks for the build of haos for rockpi. I installed it on sd card first and everything went smooth and good. …
-
データ計測と算出を行い、高レートで直接SDに保存と適当に間引いてCAN-BUSに流す
- [IMU](https://github.com/tokai-student-rocket-project/H-58-Avionics/issues/15)
- [衝撃計測](https://github.com/tokai-student-rocket-project/H-58-Avionics/i…
-
- Arduino board: Nano 33 BLE
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.15
- List the steps to reproduce the problem below
Brand new (just purchased) Adafruit FRAM…
-
It seems there is a subtle race in the DMA TX I2c routine.
Steps to recreate:
- Initiate a vectored write on a v2 I2c peripheral (tested with STM32L431RC) that has DMA configured.
- First trans…
-
In FRAM_logging.ino:
// todo - read back sketch.
Can you add such example sketch?
Nice lib!
I have strange behaviors on my electronic assemblies. I want to use this library to determine the ca…
-
Hi!
First of all, I highly appreciate the time you spend doing good libraries!
I have tried MB85RC04 FRAM (with ESP32) with FRAM9_Test example.
Changes before run:
It is not possible to get t…
-
Apparently there are a few things available for ESP8266 which are not accessible for the ESP32, according to https://arduino-esp8266.readthedocs.io/en/latest/filesystem.html#littlefs-file-system-limit…
-
I have succsessfully compiled grblHAL for the SKR2 Board. But after saving parameters the bootloader is overwritten. This is because the board has a 32k bootloader and uses the address 0x8004000 which…
-
# Abstract
We need to come to a conclusion about a communication method for our systems to talk to each other. There are multiple serial communication methods that could be utilized: Some popular one…