-
We want to build yocto langdale with this layer. We are more interested in using UHD which looks like is included in this layer. Can someone provide some ideas? We were able to build KR260 "petalinux"…
-
After building libad9166 on Raspberry Pi and running the **[CN0511 example script](https://github.com/analogdevicesinc/pyadi-iio/blob/master/examples/cn0511_example.py)** I get a segmentation fault. I…
-
The code inside quad_tracking function is ambiguous to me. It reads in current master :
```
int quad_tracking(bool enable)
{
struct iio_channel *chn =
iio_device_find_channel(dev_ph…
-
Current "Make gen-boot-load" fails. Probably there is a problem in the order of the commands. If I run them individually in pluto, after uploading the bitstream to /lib/firmware I get:
$ cd /lib/…
-
Noticed there wasn't a devcie-specific issue for wormdingler, so I thought I'd open one to keep info in the correct place.
## Software setup
- kernel: 6.4.16 (based on config from [v6.1.51](http…
-
Hello,
I know it is possible to use iio devices in burst mode setting the kernel buffer to 1.
Is there a way to use gr-iio sink blocks in burst mode?
Thank you.
Ivan
-
The PlutoSSR board (70mhz -6ghz) and the red pitaya SDR (0-60 mhz) share "similar" hardware architecture based on the Zyncq 7010.
The red pitaya and the PlutoSDR howebet uses different "front end"…
-
Hi, I am connected to a remote target over the network and I am able to read properties and single values from an IIO device (hts221), which provides a triggered buffer, and its maximum sampling frequ…
-
I did error checks for the result of iio_create_context like here
https://github.com/analogdevicesinc/libiio/blob/9a82e3757208630886f6aff25f723d9ca95a9501/tests/iio_stresstest.c#L252C1-L268C4
Howe…
-
For example, consider [this definition](https://github.com/analogdevicesinc/linux/blob/b7484c97688ddd60bfd05a1d6d28f454f3f0dbb0/drivers/iio/adc/talise/talise_types.h#L114-L128)
```c
/**
* \brie…
edsko updated
1 month ago