-
Hi. My goal is to capture Babyware - IP150 communication, so I found your tool with whose help I wanted to decrypt my payloads. While installing, I didn't use these steps:
https://github.com/deonvdw/…
-
## Alarm system
SP7000
## Environment
### Git branch
## Question
I read [here](https://github.com/ParadoxAlarmInterface/pai/wiki/Home-Assistant-integration#make-home-assistant-to…
-
EVO48
FW : 2.16
IP Module (150+)
FW : 5.02.19
HW : 020
ECO : T067
When i log into the web interface, i have the following in Main Menu
. Receiver Configuration (grey - not accessible)
. Sy…
-
I have an issue with my ip150, when it's connected to my company network there is no internet light blinking, the IP was set as static to the alarm module and I am able to ping the IP and from my netw…
-
## Alarm system
SP600 Panel
IP150 with Insite Gold
v4.42.002 firmware
## Environment
Hassio
## Git branch
I've tested both current dev and production
## Describe the bug
Unable to con…
-
hi,
ive question about new firmware. I try to connect but without any success to my EVO panel via IP150+.
Do you know, that my devices (thiers firmwares) are still supported?
I know that, i c…
-
IP150 firmware: 5.2, serial: 71053a28 | MG5050 version 7.0 | HomeAssistant OS latest version | swan disabled on IP150
Testing with default passords 0000 / paradox
I can connect to panel. I ca…
-
## Alarm system
Describe your panel model (ex: EVO192, Spectra SP4000, Magellan MG5050), access mode (Serial, IP150, etc..).
SP6000+, with ESP32 Serial/IP adaptor. Have tested on 1.05, 1.10 and 1.20…
-
**##Add Door control Please :)
Log Shows Door (Front Door) But Nothing in Hassio**
`Dakotas PIR, Lincolns PIR, UpStairsHall PIR, Master Bed PIR, Front Door RS, Fire, Dakotas Door, Lincolns Doo…
-
Thank you for this nice project. I managed to connect to my **IP150 version 20, firmware: 4.42** and my **EVO192 version 3.20 build 10**. I changed the config according to the wiki and I get _HomeAssi…