-
Will the library be updated to fully support the new ST25R95 card emulation mode?
-
Hi, I tried to compile the project under Kali and Debian. Every time i got the same error:
$ make all
===================================================================
Platform name: Prox…
-
Hello!
I have **Proxmark3 Easy**.
Information about the device with official firmware:
```
administrator@adminpc:~/proxmark3_official/client$ ./proxmark3 /dev/ttyACM0
Prox/RFID mark3 RFID instr…
-
**Describe the bug**
Cannot compile even with fresh repo clone
**To Reproduce**
Steps to reproduce the behavior:
1. apt-get install gcc-arm-none-eabi git build-essential libreadline5 libreadline…
-
**Describe the bug**
Commit d956e8c2a30d4f74f270da1d84b5ff71d4246757 was the last commit that lf t5 det works properly. After the hitag changes are added, lf t5 det always fail with "Could not detect…
-
running on windwos 10 and on the lastest version of broth proxmark and proxspace64
when I try to I make install
and I get the following error (see bold below)
pm3 ~$ make clean && make all
==…
-
with the latest pm3 :
[ ARM ]
bootrom: RRG/Iceman/master/440c05cd 2019-08-23 14:45:16
os: RRG/Iceman/master/440c05cd 2019-08-23 14:45:18
compiled with GCC 7.3.1 20180622 (release) [ARM/…
-
### Describe the bug
I tried lauching pm3 client but the prompt doesn't appear.
### To Reproduce
Steps to reproduce the behavior:
1. clone latest version (#7c33eeb)
2. change platform to PM3OTH…
-
> error: implicit declaration of function 'warnx' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
remove -Werror can work
```
$ gcc -v
Configured with: --prefix=/Applications/Xcode…
-
**Describe the bug**
After updating ProxSpace and Proxmark 3 RDV4 to latest versions/fw it takes 10-15 minutes for the client to load completely. It gets stuck at "Communicating with PM3 over USB-CDC…