-
1、First time to get the distance value, it shows undefined.
2、I was expecting to get a value of 1.93m, but I get 1.931232145, too many decimal places.
Do I need my firmware to fix it?
![image](…
-
![image](https://github.com/microsoft/jacdac/assets/3880290/3a7b7984-fdfd-4224-91ec-fe0f494f4d64)
-
When I plugged in the HapticOutput module and clicked on ADD BLOCKS, no Blocks appeared on the right side
https://makecode.microbit.org/_1FtRofCwt2FX
![image](https://github.com/microsoft/jacdac/a…
-
![image](https://github.com/microsoft/jacdac/assets/3880290/89d5bc99-a712-4b85-a29e-381ce15b89fb)
Problem blocks
https://makecode.microbit.org/S14794-75698-44410-98101
-
There is a problem with the first download of the module reading values
Screen display 'undefined' (Same problem with reading both temperature and humidity)
https://makecode.microbit.org/S14794-…
-
Should we unify index starting from 1 or from 0?
![image](https://github.com/microsoft/jacdac/assets/3880290/d0d2515e-414d-49f0-96a5-a03945f89767)
-
to devicescript-esp32, devicescript-pico
-
https://makecode.microbit.org/_2rtFM0YJ28Yw
first time to show number of pixels or brightness,it gets 'undefined' and 'NaN'
![image](https://github.com/microsoft/jacdac/assets/3880290/118ce0da-9…
-
hey,guys,we are debugging the servo in makecode.
We found a bug.When I set the angle for servo1 and servo2(Serov1->60,Serovo->46),I downloaded the hex.
The Servo1 and Servo2 turns to 0 degrees(did n…
-
Repro
1. load jacdac extension
2. connect micro:bit and download empty program
3. See the following in log:
```
pxtapp.js:1
Failed to execute 'postMessage' on 'DOMWindow':
The ta…