-
### The problem
failed setup - iAqualink will not run
aqualink integration not ready yet: Error while attempting to retrieve devices list: ; Retrying in background
issue when updating to this:
…
-
I noticed within 2.3.2, the watts are not showing up within the UI. When I debug the logs, i can see the following which indicates its finding the correct watts. RPM are showing and speeds are updatin…
-
First, thanks for providing a great example for connecting right to the AquaLink system. I'd been working on a similar project for the past several months, and was delighted when I found your code ju…
-
### The problem
when loading the latest version (5.0 or 5.2), I observe that the BMW connected drive, the ECOWITT, Canon TR7500 series, Lawn Mower STIHL iMow integrations do not work anymore
### W…
-
Im just getting inundated with this:
17:09:15.804 Debug: PDA: To 0x62 of type Status | HEX: 0x10|0x02|0x62|0x02|0x00|0x00|0x00|0x00|0x00|0x76|0x10|0x03|
17:09:15.978 Debug: Aqu…
-
this integration seems to conflict w/ the official Jandy / Hass one... Perhaps rename it to iaqualinkRobot ?
```
➜ ~ grep aqualink config/home-assistant.log
2023-05-31 12:27:23.781 WARNING (Sync…
-
this integration seems to conflict w/ the official Jandy / Hass one... Perhaps rename it to iaqualinkRobot ?
```
➜ ~ grep aqualink config/home-assistant.log
2023-05-31 12:27:23.781 WARNING (…
-
### Feedback
The integration ends with an error message:
No systems detected or supported
19:04:15 – (ERROR) Jandy iAqualink
vr is not a supported system type.
19:04:15 – (WARNING) components/iaq…
-
Not sure how the Makefile got messed up but it's no longer linking against the pthread lib
```
pi@raspberrypi:~/git/AqualinkD $ make
OS: 11 (bullseye)
GLIBC build with: ldd (Debian GLIBC 2.31-13…
-
Hello, I am trying to adjust the spa temp from the web UI, and while it is able to control the heater temp and turn it on and off, it will not set the temperature above 96º f. I can slide it all the w…