-
It would be good to know the max current you can draw from each port and especially the onboard voltages
For example:
1. Maximum current that can be drawn from all combined 12V ports that are fed fr…
-
For the past couple days I've been trying to do something simple in concept.
I'd like to have my LED Strip run through animations configured by the adafruit MQTT service.
When music plays from t…
-
Could you please add a pinout diagram like for the other projects please?
-
Actually more comments (not actually issues) again I can't use the QQ chat to contact the author.
Upgrading PWM refresh rate to reduce color smear:
I have done a simple head to head test compari…
-
Hi Lyliya,
I hope you are well. I found this plugin which is exactly what I needed, it does not work for me, and wonder if you could advise why.
I have two Bluetooth devices connected to my rasp…
-
**Describe the bug**
A clear and concise description of what the bug is.
The gyroscope attitude is reversed
**To Reproduce**
Steps to reproduce the behavior:
I used the firmware version 0.4.3, af…
-
```
I want to Use 5050 smd Led strip insted of RF-W2SA50TS-A34.
But I noticed that Led strip forward current is 150mA (and the RF-W2SA50TS-A34
is only 30 mA) - see attached datasheets.
I assume tha…
-
After working with this device for a couple hours, I wanted to optimize some of the larger parts of the config.
I first attempted to implement blip_light as a pure lambda, but I cant quite figure …
-
### Link
https://www.aqara.cn/LED-Strip-T1_overview
### Database entry
{"id":61,"type":"Router","ieeeAddr":"0x54ef4410008c1c76","nwkAddr":44031,"manufId":4447,"manufName":"Aqara","powerSource":"DC …
-
I am trying to set up a unified lighting display with my keyboard and RGB LED strands, and a program like this would be cool. It could be printing device RGB data to the Arduino or other receiving dev…