-
I started some tests with the serial USB (OTG) on the STM32u575 to get a virtual com port on a Windows PC.
After fixing some issues with the clock config file (because it was never used and tested …
-
Hi,
I have the following questions:
1. How can I build cryptocell-312-runtime (https://github.com/ARM-software/cryptocell-312-runtime.git) for MacOS?
2. In the build setup, according to the documen…
-
**Have you looked for an answer?**
I looked at the PSoC 6 and Murata comunity forums of Cypress.com and also at the MBed OS samples for PSoC 6.
We appreciate you checking the documentation, releas…
-
### Description
- Target: STM32L476RG (ARM Cortex-M4F)
- Toolchain: gcc-arm-none-eabi 8.2.1
- Tools: mbed-cli 1.10.1
- mbed-os version: 5.12.1
- mbedtls version: 2.7.6 (is however still p…
-
### Description of defect
A runtime assertion happens on FRDM-K64F when assigning a pin name as "NC". Specifically this happens on BufferedSerial() when assigning the Rx pin to be NC. This is…
-
Hi, thanks for this great library.
I am using the Crypto library and AES examples.
I can compile and run ok on Teensy, M0 and M4. However when trying to compile for ESP32 I get the following error.…
-
- Arduino board: Arduino Nano 33 BLE
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.10
- List the steps to reproduce the problem below (if possible attach a sketch or
c…
-
avr.h:12:10: fatal error: avr/io.h: No such file or directory
#include
exit status 1
Error compiling for board Arduino Nano 33 BLE.
-
Hello All,
I was wondering if we could get build instructions for libmbed.a - (rather than just patching it...) -
[https://github.com/arduino/ArduinoCore-mbed/tree/master/variants/PORTENTA_H7_M…
-
Hi,
I use Arduino Nano BLE 33/Sense (as Bluetooth Periperal) to sample a full rectified sine voltage wave and real-time send it through bluetooth, then bluetooth central (Such as: pad) can show the …