-
First of all thanks for the huge job!
I ask for clarification regarding the messages in downlink.
If with the old library (vers. 2.3.2) I put several messages in a queue and they were downloaded in …
-
Hello,
I'm using an SX1276 on a custom hardware with your library. I use European frequency bands and push data to TTN at the moment 11 bytes of payload every 5 seconds (5 seoncds for testing, in r…
-
**Describe the bug**
The device sends too many uplinks (at a 5s interval) at the beginning of the execution.
**Environment**
- LMIC: 4.1.1
- PlatformIO Core: 6.1.4
- Network provider: Chips…
-
I am using a Arduino Pro mini 3.3V with a modtronix inAir9b device.
Pin mapping is as follows
.nss = 10,
.rxtx = 6,
.rst = 5,
.dio = {2,3,4}
I am able to send a join request and I can also …
-
Is anyone else experiencing strange behavior on TTN (community / v2) when having ADR and linkcheckmode both enabled?
I'm running LMIC v3.2. I have no idea if this is a TTN or LMIC issue.
Every…
-
Arduino Pro Mini Atmega328P 3.3V 8MZ
Arduino IDE Version 1.8.15
MCCI LoRaWAN LMIC Library Version 4.0.0
I am trying to setup a lorawan device using Arduino Pro Mini and RFM95 module according to …
-
We have a large number of devices in the field.
We need a simple way to force a rejoin with a new AppEUI. (Rejoining with the same AppEUI is a race condition with the V2 network, and involves break…
-
Dear Support,
I have tested with the example when joins work for some times.
But after some test i didn't any more!
But I see on my gateway the the join is accepted but it will not be received!
W…
-
Hi
Sorry if this question is simple, but I am a very beginner with C++ and Arduino.
I use an Heltec ESP32 SX1276 Lora Board as a TTNMapper.org Node.
I took the example from: https://www.thethin…
-
Add LoRa protocol to connect sensors over long distances and send data if no wifi network is available.