-
I use ESP32 DOIT V1 dev board and HopeRF RFM96 radio module. I add required library, edit platformio.ini file and could compile the sketch successfully. When upload code into dev board, device reboot…
-
Adafruit 32u4 boards with basic temperature sensors. Testing them for a reading and connecting to The Things Network.
-
Great to see work is done to bring an LMIC-based stack back into development. I'm curious how you are planning to structure the development of this stack?
IBM used a fairly closed model, where deve…
-
Currently (at unixtime 1687616280), at:
```
"latitude": 42.4,
"longitude": -71.1,
```
(truncated latlon values for privacy)
I'm seeing:
```
"temperature": 72.57,
"apparent…
-
All good until I get to the 7th step of the README file:
7. Open this project file main/main.ino with the Arduino IDE and upload it to your TTGO T-Beam.
I get this error message:
_/home/rak…
-
Hello :)
I just received my LILYGO V2.1 from the official store on AliExpress and I'm trying to get it working with my Neo 6M GPS dongle.
I've uncommented the required lines, connect the GPS ser…
-
-
Hi,
just revamping my Heltec-based sensors that were up and running under TTN v2. Moving to TTN v3 I have a registered gw but devices are unable to ttn.join.
Any hints/direction on documentation o…
-
I've started testing ADR and I can see the MAC commands from the network server changing the TXPower, however the TXPower appears to stay at the maximum setting.
Am I able to print out MAC downlink…
-
Let's look into evaluating this library on some FeatherM0 LoRa boards to see if we get better performance:
https://github.com/mcci-catena/arduino-lmic#supported-hardware