-
Bonjour M. Molinaro and thank you for your work!
I tried to establish a CAN FD communication, using two Arduino Nano clones and two MCP2517FD click boards from Mikroelektronika, connected with a sh…
-
Thanks a lot Mr.Molinaro,
I'm trying to use 2517FD with an ATMega328P (arduino UNO), but it seems to SPI doesn´t work. Could you help me please?
Many thanks!
Jan
…
-
Hello,
Please, can you include my ACAN2517 and ACAN2517FD libraries (CAN driver for MCP2517FD CAN Controller):
https://github.com/pierremolinaro/acan2517FD
https://github.com/pierremolinaro/acan2…
-
I just purchased last week from your store a t3.2 can-fd to usb converter and a can-fd breakout board but in the meantime I already had a couple MCP2517FD Click boards before I found yours. Anyway fr…
-
weather supoort can-fd function?
-
Hello Jarvis!
You mentioned MCP2517FD controller which CAN FD support.
I seems device with this p/n has disappeared.
Google lists only a few results for "MCP2517FD", so a CAN-FD standalone controll…
iDoka updated
6 years ago
-
Hi,
Thank you so much for the demo code.
When I used the APP_TransmitMessageQueue() function or DRV_CANFDSPI_TransmitChannelLoad() to transmit the data, after the function is called, the FIFO beco…
-
Hi!
Strange observation while writing a new driver:
When using the flags: IRQF_ONESHOT | IRQF_TRIGGER_LOW
with request_threaded_irq I see that after I unload and reload
the module that the spi…
-
Hi!
Is this a "known" feature of the SOC that the spi clock divider is limited to a power of 2 on a raspberry 3/CM3 (and actually rounding up the value)?
Observed frequencies are 12.5MHz when re…
-
The current car CAN specification is moving to FD.
FD is also supported in Kvaser's library. It would be very useful if you could add FD's functionality to a very powerful Python-can library