-
This request is a followup of #240 (valid pins for RX/TX, strapping pins ...)
Please could you add "weak" attribute to the functions:
```
bool isValidGPIOpin(int8_t pin);
bool isValidRxGPIOpin(i…
-
cannot send to the microcontroler with a computer with ubuntu
-
In QMK are already three different build targets that handle the IBM model M.
All three are in different folders and different folder structures. None of them is listed in the community supported ke…
-
Hi @midilab,
I have been working with another ARM board, the [Adafruit QT Py M0](https://learn.adafruit.com/adafruit-qt-py) which is pin compatible to the Seeed Xiao board with a few hardware diff…
-
I'm actually looking to do similar with my tub and trying to figure out the pinout. Based on your findings I suspect the wifi module is nothing more than a dumb RS232 to Wifi module and that the prot…
-
Hi,
i've 2 solar panels with 320 Wc and 30V 10A connected on a aps ds3 L microcontroler
but with rpiecu i've only 35 V max and 50 % of power..
now i've 17,5 W and with a my solar outer i've double …
-
Hi,
Something goes wrong for SWD programming.
It's seems that the DAPLink is not working as expected.
OS : Ubuntu 20.04 (64bits)
The installation was done as specified on the github page (ie c…
-
Do you think it will work with ESP32 webserver? Is it possible to display serial terminal of ESP32?
Thanks.
-
### Summary
I’m trying to compile the mbedTLS library to use with RP2040 microcontroler (in a .a library file), to use in with CMake [pico-sdk](https://github.com/raspberrypi/pico-sdk) of Raspberry…
-
Hi
I am currently implementing CanOpenNode on dsPIC33FJ128MC710A based on example_PIC32.X and have found an issue which can be problematic on 16bit devices.
In file CO_PDO.c, function CO_TPDO_in…