-
I used my PM3 to dump a few mifare ultralight EV1 cards but when I upload a dump to my Chameleon Tiny and I check it with my PM3 I see that the signature has changed to a repeat of "CA".
This is t…
-
Hi everyone
I successfully extracted the contents of a MIFARE classic card using mfoc-hardnested using
`mfoc-hardnested -f keys.txt -O extractedcard.mfd` over an USB Adafruit PN532 Breakout Board:…
ld21 updated
12 months ago
-
As mentioned in slack, this occurs on a nexus 5x and Samsung xcover4
To reproduce, connect proxmark3, add card, mifare, add keys. At this point the app crashes.
Feedback has been sent.
-
```
Reported by [https://code.google.com/u/114415527994645740894/ kev.y.wang], Jan
1, 2012
*What steps will reproduce the problem?*
1. inside libfreefare-0.3.2 dir, run ./configure --prefix=/usr
2. …
-
![Screenshot-20240216-175623](https://github.com/flipperdevices/flipperzero-firmware/assets/126610656/58514f04-9ddb-4e60-8acf-d1c7375a3b22)
![Screenshot-20240216-175616](https://github.com/flipperd…
-
Library currently supports NTAG\* tags, and hopefully other 4-byte page tags (Mifare Ultralight), but it currently does not support Mifare Classic tags, which have 16-byte blocks.
-
regular read with MFRC522 not possible, due to missing key.
MFCUK and MFOC aren't going anywhere, not even hardnested (https://github.com/bennesp/hardnested). Rough setup here: https://github.com/h…
-
```
Reported by project member romuald@libnfc.org, Sep 30, 2012
If you are authenticated on a sector but the requested MIFARE cmd (read, write)
is not permitted by current access bytes, libfreefare s…
-
### Describe the bug.
NFC saved card can't use"Unlock with Dictionary"
I used Flipper to read a card and then sniffed the key.
Then, open saved and find the sniffing card.
choose Unlock with Dicti…
-
When a secure channel is present, mifare_crypto_postprocess_data() should insist upon checking the CMAC that is supposed to be present, and finding that the CMAC is missing, report failure.
Otherwi…