-
Hi,
MKRWANFWUpdate_standalone from MKRWAN_v2.h does nothing, just print "Press a key to start FW update".
Modified the baud rate to 57600 as seen on [this post](https://forum.arduino.cc/index.ph…
-
Hi,
I updated my MKRWAN 1310 with the exemple code from the MKRWAN_v2 library: MKRANFWUpdate_standalone and it gets updated to the Firmware version 1.3.0.
Could you pls update the fw.h file to t…
-
With the example LoRa Send and Receive the module MKR 1310 show the message "Failed to start module" (line 25 on the source example code). The module works fine on version first version of MKRWAN rele…
-
![image](https://user-images.githubusercontent.com/5605614/140980533-66c3c7a5-695e-4c58-9163-7504333cfc82.png)
Both the [Arduino MKR WAN 1300 (LoRa connectivity)](https://store-usa.arduino.cc/…
-
Using the SerialFlash library, accessing the on board serial flash memory works fine under Arduino SAMD Core library v1.8.10. After upgrade to 1.8.11 access to the on board flash memory stopped worki…
-
Hello
i have a problem to start. there is no com port anymore to talk to the arduino
I am traying to execute firstconfigurationv2 but get the following errors
WARNING: library MKRWAN_v2 claims to …
-
When installing a library, the output panel shows the progress messages but does not inform user about the completion of the task.
For instance, when installing the `ArduinoIoTCloud` library, the o…
-
@akash73
I am having troubles getting my 3 Lora Vision Shields working in North America.
Any code or suggestions would be appreciated but I think my biggest issue is my gateways are not stable. (…
-
Dummy message uses CTX for poll and requests thus an ACK.
Also, strange behavior where UTX return busy, CTX don't.
```
### Data string: +MSIZE
### AT: +UTX 1
### Data string: +ERR_BUSY
### …
-
Endianness for the AppEui: most providers such as [TTN](https://www.thethingsnetwork.org/map) and [Helium](https://explorer.helium.com/coverage) have a default for Endianness but also a second metho…