-
When implementing the Modbus binding template I stumbled open the zeroBasedAddressing flag. For me it's unclear how I should interpret its description (https://w3c.github.io/wot-binding-templates/bind…
spf00 updated
3 months ago
-
### What would you like to happen?
hello,
I am A Java developer and I only need to develop some drivers for plc4j such as focas, Qna-3E, A-1e, etc. When I built plc4x from source, I found that it wa…
-
```
What steps will reproduce the problem?
1.ReadHoldingRegisters(1, 1, 1);
What is the expected output? What do you see instead?
The PDU should contain 0x00, 0x00 for the starting address. Instead,…
-
```
What steps will reproduce the problem?
1.ReadHoldingRegisters(1, 1, 1);
What is the expected output? What do you see instead?
The PDU should contain 0x00, 0x00 for the starting address. Instead,…
-
```
What steps will reproduce the problem?
1.ReadHoldingRegisters(1, 1, 1);
What is the expected output? What do you see instead?
The PDU should contain 0x00, 0x00 for the starting address. Instead,…
-
```
What steps will reproduce the problem?
1.ReadHoldingRegisters(1, 1, 1);
What is the expected output? What do you see instead?
The PDU should contain 0x00, 0x00 for the starting address. Instead,…
-
Can I use this modbus ros driver to communicate with a communication protocol modbus rtu?
-
# 📚 Docs or Wiki Bug Report
### Description [**REQUIRED**]
Is there any protocol specification(s) for the various device protocols in devices? For example, [Step #3 on this page](https://docs.edg…
-
### Describe the bug
Some of values have wrong interpretation
```sh
Grid Current: 0.8A >> 0.08A
Grid Power: 93W >> 9.3W
Grid Power VA: 118 VA >> 11.8 VA
```
Multiplied by 0.1 need to be 0.01
#…
-
Hi,
my recently installed Solaredge SE10K is connected via LAN (no WiFi).
I´m able to poll Modbus Data via mbpoll commandline on port 1502:
Protocol configuration: MODBUS/TCP, FC3
Slave confi…