-
Hi,
as read that testers are welcome...in the next weeks i would integrate OpenDTU with the SolarExportControl from you..
acutally i´m running on AhoyDTU standlone without zero export control.
M…
-
I have received a batch of PCBs and went on to try them. There is some odd behaviour I couldn't resolve: When being plugged in (either via 24V when plugged into the Uppåtvind or 5V when programming/te…
-
I have to restart the Add-on. It have set "Watchdog=This will start the add-on if it crashes" so maybe it's hanging rather than crashing?
On my card each of the heaters is greyed out and marked as …
-
So I set up an MQTT broker and linked it to Home Assistant, and I soldered the board in and flashed it, and ran the config from its ad-hoc network... now what? I'm seeing the device on my router but I…
-
### What issue do you have? Please be as thorough and explicit as possible.
I have a Homekit house with quite a few devices. I had the MTS200 linked direct via native homekit, but these DO NOT LIKE W…
-
I use domain names on my router to easily connect to devices on the local network. example: device.local. When trying to connect to mqtt broker on a domain, an error occurs: it cannot connect. Accordi…
-
### Govee Device SKU
H61E1; H6056; H6076
### Govee2MQTT Version
2024.04.29-30cf7732
### Describe the issue
Recently I can no longer start the add-on. When I start it, the dot turns gree…
-
# Problem
Setting the MQTT server ip to an empty string causes the BL602L20 module to no longer respond to HTTP requests within the network it is connected to.
# Reproduction
1. Start BL602L20 mo…
-
When disabled option CONFIG_AUTO_UPDATE_RCP in menuconfig, then cannot compile project.
Double checked that missing macro checking for above option in file 'esp_ot_config.h' for below define.
`#…
-
Hello
I am using your firmware to Network Module Web_Relay_Con V2.0 HW-584, I am interested in your project.
After installing several HW-584 modules in the same network, I have a problem with them …