-
https://alioth-lists.debian.net/pipermail/nut-upsuser/2022-December/013026.html
> ... Just for grins, I edited /etc/ups/upsd.conf to uncomment the STATEPATH
> line. I set it to /run/nut. When I …
-
Hello, is there a way to manage nJoy ISIS 1500L?
I use it under a Gentoo-based distro.
I have the following info:
```
Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial
Devi…
-
Not seen in other builds, but with the last "properly" behaving NUT fightwarn build being https://ci.networkupstools.org/job/nut/job/nut/job/fightwarn/73/ in July 2023, the subsequent https://ci.netwo…
-
Guys, my APC BackUps ES 525 isn't powering off by Truenas OS, but turns off when connected to my laptop using PowerChute software.
Shell log shows this error when I manually try to power it of usin…
-
Two configured snmp ups's with identical configuration other than the name, IP address and passwords. One always starts fine, the other never starts. I've tried exchanging their order in ups.conf, com…
-
I normally copy & paste Endpoint URL / POST Payload / RESPONSE Payload from Chrome Developer tools -> Network to WireMock Chrome Extension.
It drives me nut when I click Chrome Developer pane, the…
-
Hi!
I have a Riello UPS, with netman 102 plus network card, firmware 1.21 (latest one that i've found). I'm trying to connect it via snmp to the nut server hosted on an home assistant installation.
…
-
I run Debian 11 with NUT 2.8.0 and connect a [generic ViewPower UPS](https://www.eltrox.pl/p/35383-ups-zasilacz-awaryjny-volt-polska-micro-1000va-600w-1x9ah). It gets identified:
```
Bus 001 Device …
hmv47 updated
4 months ago
-
Hello I have a Bluewalker UPS Powerwalker VI 2200 LCD UPS. Unfortunately, always after some time comes the following error messages:
> usbhid-ups[2387]: libusb_get_interrupt: could not claim interf…
-
I have [this UPS unit w/ USB interface](https://www.nhs.com.br/produtos/mini-senoidal-600va/), 100% supported by the gamatronic driver. It works perfect on my x86 computer but it doesn't on my Raspber…