-
I see multiple times the following error:
Pretty clear whats happening as it expects 00 - 64 at that location, but there are a lot of these errors. Could it be that 64 is not the max value?
Att…
-
Hi,
Is it possible to add a feature to use an external temperature sensor instead of the one in zone's thermostat?
Thank you.
Greetings,
Angelo.
-
Hi Ramon,
Thanks for the great effort and value you deliver for the community building these great APPS!
I use the Visonic app for years; it's awesome!
I have ordered the new OTGW from nodosho…
-
Setup:
OTGW v2.8
PIC16F1847 v6.4
Wemos D1 mini v0.10.0+eeeb22c
Domoticz 2022.2 - native OTGW interface using PS=1 mode
Remeha Calenta and iSense thermostat
Sporadically some OTGW sensors show …
-
### The problem
My Plugwise Anna thermostat switches from available to not available every few minutes. If the device is available, it will switch to unavailable in about 1 minute and comes back a fe…
-
### Describe the bug.
The integration is crashing during HA startup. I was initially using the HA integration but installed the beta to test, and it's crashing with the same error:
```
2022-11-…
-
In Domoticz I use the Hardware interface "MQTT Auto Discovery Client Gateway with LAN interface" to collect all the boiler sensors from my OTGW.
This works great with one exception.
The Domoticz Err…
-
### Feedback
Can the default TCP port be mentioned in the 'configuration / path' section:
According to this topic : https://www.domoticaforum.eu/viewtopic.php?t=13438&sid=f0c7225c9f97a60dd771088…
-
### The problem
Integration was working correctly, woke up this morning and it doesn't load giving the error below. I'm using it with Lisa zones, radiator valves and a Loria Duo heatpump. Plugwise ap…
-
### The problem
Using the Home Assistant UI I tried to add my Smile (Anna). First using the autodetected integration and later manually using the static ip. In both cases this resulted in a `Unknow…