-
I have developed an Artix-7 PCIe USB3.0 card with M.2 interface, as shown in Figure1,2 and validated the normal operation of both the F601 and PCIe interfaces using USB3.0 loopback and PCIe RIFFA pro…
-
I installed npcap on a Windows tablet device. The network adapter of this device is Realtek PCIe GbE Family, and the network card driver is rt86win7.sys. Npcap failed to capture the network traffic of…
-
### Description
When maxTrackPlacementLength value is set at 128, train signal block placement is breaking. It can only placed at start of the curve (1 block after the starting point) up to half of t…
-
After run bonding.py in Rhel8.2 with Avocado(version: 82.0), it shows "FAIL: bond name already exists on local machine".
【Test Step】
Step 1. Prepare 2 terminals while each one is equipped with 1 N…
-
I installed hackintosh on asus UX550VD, I managed to run everything except sleep and SD Card Reader.
Please tell me how you managed to run SD Card Reader ?
My Card Reader Alcor Micro PCIE AU6621
-
Initial specificacion:
Design based on CUTE-A7 and fully software compatible
- FPGA copied with pinouts from CUTE-A7
- 6-layer stack up
- Power supply copied from KASLI-DIOT
- SMA connectors: …
-
I have the ROC-RK3399-PC with Mezzanine. I'm trying to go from the official Libre [u-boot](https://boot.libre.computer/release/roc-rk3399-pc/) 2023.07+ (Oct 13 2023) to the most recent tow-boot but i…
-
### What happened?
Z2M did not list any devices, restarting the add-on in HA lead me to an "Hello, you've found a bug. Congratulations!" page.
So here's the file I've downloaded:
[download.zip]…
-
Hey everyone,
I recently bought got a Raspberry Pi5 which I'd like to use for LinuxCNC. To have an additional NIC to interface with my machine I thought I'd be nice to combine it with the Delock Co…
-
### Describe the bug
My environment is the ucx perfest **tag_bw** test of the GDR in the machine. When I configure the environment variables of one network card, the measured speed is very fast. The …