-
Is it possible to turn off battery LEDs on model 1 using GPIO (or other way) command ?
-
Hi,
I am monitoring the battery by rpimonitor which sends get* to the server pisugar-server each 10sec.
pisugar-server logs each access to /var/log/syslog, saturating the log.
I tried preven…
-
I am encountering an issue with both a 900mAh and 1200mAh PiSugar module where the devices will not charge.
**Expected behavior**
1. Connect microUSB cable
2. All 4 blue LEDs blink for about 0.…
-
The micro-usb port broke off of the pcb, and I'd like to re-attach it or find out where the 5v and ground from the USB port can be soldered elsewhere on the board.
-
I'm using the PiSugar2 with a Raspberry Pi Zero and a a PiOLED. Sometimes when I use the battery the PiOLED only gets ~1.3V on pins 3 and 5. Because of this, my screen won't turn on. Is there any reas…
-
This is using a raspberry pi 4 with the hyperpixel 4.0 touchscreen ( the wide one.. - https://shop.pimoroni.com/products/hyperpixel-4?variant=12569485443155 )
I had followed directions on the main…
-
The problem:
- RTC clocks should be set to UTC time on Linux systems (https://tldp.org/HOWTO/Clock-2.html). Currently, the web interface sets the RTC value to local time, which breaks things.
- Not …
-
- 色々
- https://www.adafruit.com/product/4114
- LiPo
- Pimoroni PIM185 ZeroLipo
- https://www.sengoku.co.jp/mod/sgk_cart/detail.php?code=EEHD-55Z6
- https://media.digikey.com/pdf/Data%…
-
Broadcast a meesage to all user when PiSugar has low battery, and then we could save all works before system shutdown.
-
![RCD_Setup_OnTable](https://user-images.githubusercontent.com/3580069/87107405-aec9d080-c22d-11ea-80c0-74ca1a2e7c73.png)
In the image, our remote collab design system is a collection of devices (p…