-
for running in fish shell the following should be used:
```
# Run PADD
# If we’re on the PiTFT screen (ssh is xterm)
if test "$TERM" = "linux"
while true
./padd.sh
sleep 1…
-
Tbo-s updated
4 months ago
-
Hey, I am getting an error loading this.
```
[DEBUG/MainProcess] added worker
[DEBUG/ForkPoolWorker-2] Queue._after_fork()
[DEBUG/ForkPoolWorker-2] Queue._after_fork()
[INFO/ForkPoolWorker-2] c…
-
Board: BPI M2 Zero.
I'm trying to setup bluetooth.
The same command worked fine with 4.20.17
`brcm_patchram_plus -d --patchram /lib/firmware/ap6212/bcm43438a1.hcd --enable_hci --bd_addr b8:27:e…
-
I am running into an OSError trying to run sample code for MCP3008 on the Libre Computer aml-s905x-cc "Le Potato". I have made slight changes to sample code, changing the pin numbers, putting the prin…
-
### Script Command
```shell
sudo -E env PATH=$PATH python3 adafruit-pitft.py --display=st7789_240x240 --rotation=0 --install-type=mirror
```
### Operating System
Raspberry Pi OS, Legacy, 32-bit, F…
-
### Platform
NRF52, ESP32
### Description
(ignore the platform as there was no option for Linux native)
With the raspberry pi shortage still in mostly full effect I was wondering what is t…
-
These are going to be tricker than the other panels: We need to use the transposer to write back into memory, then when the transposer is done we need to use the DMA engine to stream the new frame ove…
-
I am using an [2" ST7789 TFT](https://www.adafruit.com/product/4311) using [adafruit-pitft-mipi.py](https://github.com/adafruit/Raspberry-Pi-Installer-Scripts/blob/main/adafruit-pitft-mipi.py#L161-L…
-
### Board Name
Raspberry Pi 5
### Steps
When following the following steps on the raspberry pi 5:
```py
pyenv virtualenv system test
pyenv shell test
pip install --upgrade Adafruit-Blinka
``…